鸭骨粉设备 威海肉骨粉设备

联系人:杨兴业 Beihai Xinhong Hengda Mechanical Equipment Co., Ltd can come up with the best solution that meets our customers’ need no matter where they are and no matter the practical needs are. We can help our customers to make project planning, including site design, production line equipment configuration, optimization of equipment performance or cost-saving optimization. In short, the company can provide customers with "turnkey" projects. With our professional knowledge and services, whether the investors have the relevant experience or not, Beihai Xinhon Hengda is able to help customers to achieve fruitful results in a short period. 而液体经过离心机后，分离出动物油和含有部分蛋白质及其它物质的蛋白水液。鱼油存储于油罐中作为副产品外售。蛋白水液中大致有5%的固体含量，经送到浓缩设备将大量水分蒸发掉，将浓缩后成品的含固量为50%，将此蛋白水液送入干燥机乾烘干，可增加骨粉的产量和蛋白质比例。 After the liquid passes through the Tricanter, the fish oil and the protein water are isolated. Fish oil is stored in oil tanks and sold as a by-product. Protein water has roughly 5% of the solid content and then to be evaporated a large amount of water in the evaporator device. After that, the liquid has 50% of protein solid, which then will be sent to a Dryer. In this way, we can increase the fishmeal yield and protein ratio. 北海新宏恒达机械设备有限公司可以根据不同国家、不同客户的实际情况和需求，为客户量身打造的解决方案，包括项目进行规划包括场地设计、生产线设备配置、优化设备性能或进行节省成本的优化。除了对项目进行规划，公司还可负责进行全线设备的安装和试产调试，以确保整个生产线匹配客户的需要并处于工作状态。简言之，公司可为客户提供“交钥匙”工程。不管是有无从业经验的投资者，公司均可以的知识和服务迅速帮助客户在行业中取得丰硕成果。 粉生产工艺Fish Meal Production process 1） 原料进入储料库暂时存储，后送入原料池，然后通过螺旋输送机（地绞龙）运送，通过金属探测器的检测，后进入Cooker； ************************************************************************************************************************************************************************************************************************************） 蒸煮机采用蒸汽作为热源，间接对原料加热。加热温度可达95℃以上，不仅可对物料进行有效 ，且能将物料充分、均匀地煮熟。充分煮熟的物料可以很方便地进行脱水、脱脂处理；随后 The Cooker uses steam as a heat source and indirectly heats the raw material. Heating temperature is up to 95℃, not only the material can be effectively sterilized, but also can be fully and evenly cooked. Fully cooked materials can be easily dehydrated, skim treatment afterwards