鸭骨粉设备 黄冈肉骨粉设备 联系电话

联系人:杨兴业 而液体经过离心机后，分离出动物油和含有部分蛋白质及其它物质的蛋白水液。鱼油存储于油罐中作为副产品外售。蛋白水液中大致有5%的固体含量，经送到浓缩设备将大量水分蒸发掉，将浓缩后成品的含固量为50%，将此蛋白水液送入干燥机乾烘干，可增加骨粉的产量和蛋白质比例。 After the liquid passes through the Tricanter, the fish oil and the protein water are isolated. Fish oil is stored in oil tanks and sold as a by-product. Protein water has roughly 5% of the solid content and then to be evaporated a large amount of water in the evaporator device. After that, the liquid has 50% of protein solid, which then will be sent to a Dryer. In this way, we can increase the fishmeal yield and protein ratio. With the best hope to solve the customer's worries, Beihai Xinhong Hengda has developed a scientific management system and perfect after-sales service system. We strives for perfection in after-sales service to satisfy every customer. We provide one-year, free-of-charge warranty, as well as the life-long service of repair, upgrade, and technical support services to service our customers to the end. The company has also set up several after-sales service centers at home and abroad. In addition to the domestic after-sales service center, we respectively set up after-sales service stations in India and Mauritania, where the long-term stationed technical staff is providing rapid responses to surrounding customers. In the future, a number of service centers will also be established to better serve customers. At the same time, the after-sales team can also help customers upgrade new equipment, new processes, as well as advice the improvement for the customer’s old production machines as well as the improvement for the product’s quality. 北海新宏恒达机械设备有限公司前身是北海市新宏鱼粉设备有限公司，拥有多年的设备研发、生产、安装和调试维护经验。其团队拥有大量从业超过20年、经验丰富的，公司在科研方面投入大量资源，获得国家创新基金奖励，获得等荣誉证书。每年申请、获得国家专利、新型实用专利数项。其中在干燥机方面获得了多项国家专利，使得在产品特别是干燥机、浓缩设备、除臭设备等性能树一帜。 2） 浓缩完成后的液体被输送至干燥机（同鱼粉生产工艺流程第4步），与榨饼一起经过干燥机的加热脱水处理，后成为成品鱼粉。 After the concentration the liquid is transported to the Dryer (same as the fishmeal production process step 4), mixing with the presscake in the Dryer to dehydrate and finally to become the powder of fish meal. 粉生产工艺Fish Meal Production process 1） 原料进入储料库暂时存储，后送入原料池，然后通过螺旋输送机（地绞龙）运送，通过金属探测器的检测，后进入Cooker； ************************************************************************************************************************************************************************************************************************************） 蒸煮机采用蒸汽作为热源，间接对原料加热。加热温度可达95℃以上，不仅可对物料进行有效 ，且能将物料充分、均匀地煮熟。充分煮熟的物料可以很方便地进行脱水、脱脂处理；随后 The Cooker uses steam as a heat source and indirectly heats the raw material. Heating temperature is up to 95℃, not only the material can be effectively sterilized, but also can be fully and evenly cooked. Fully cooked materials can be easily dehydrated, skim treatment afterwards